|
|
El Diablo 100 |
|
|
|
||
|
•
50/100 Watt Output Selector Offers The Tone and Feel of 2 Different Amplifiers |
||
|
•
Dual Speaker Jacks w/ Impedance Selector Switch and Imp.
Calculator |
||
|
•
Direct Output section—XLR Freq. Compensated w/GRND Lift;
1/4" Line Out; 0db or -20db Switch |
||
|
•
Effects Loops—Individual WARM Ch.; HOT Ch. & Global (serial) Effects Loops |
||
| • Reverb Cancel Jack—Optional Single Button Footswitch | ||
| • Foot Switch—Din Plug Input for 5 Button Footswitch (included) | ||
|
• Power Inlet/Fuse Holder Plug |
||
|
• 115/230 Voltage Selector Switch |
||
|
|
BP30-212 | |
|
|
• Class A, EL 84 Power Tubes | |
| • All-Tube Signal Path | ||
|
•
Flexible Power Selections-Pentode/Triode Selector 30 Watts/15 Watts/8 Watts |
||
| • Tube Boost Preamp Stage (Footswitchable) | ||
| • Passive 3-Band EQ | ||
| • Five-Position Voicing Circuitry | ||
| • Tube-Driven Reverb | ||
|
• Tube Rectifier |
||
|
• Accutronics™ Long Pan Reverb |
||
| • 12" Alnico Red Fang™ Speakers by Eminence | ||
| • Solid 13-ply Baltic Birch Plywood Cabinet | ||
| • Classic Styling | ||
|
|
Shen Pro | |
|
|
• Powerful 200 Watt Output for Increased Headroom | |
| • Select or Blend 12AX7 Tube Pre-amp and FET Pre-amp | ||
| • Two Channels w/3 Band Active EQ with Sweepable Mid Freq. | ||
| • XLR and 1⁄4" Inputs (Mix Together) | ||
| • All Input Signals Mix Together | ||
| • Signal Input Phase Switch for Each Channel | ||
|
•
Dual DSP Effects Processors with 15 programs — One for
Each |
||
|
• Effects Loop |
||
| • Neodymium 300 watt 12" Loudspeaker | ||
|
• Compression Bullet Tweeter with Level Control |
||
| • Auxillary Input w/RCA & 1⁄4" Jacks | ||
|
|
TS-412SL, TS-412ST, TS-212 | |
![]() |
|
|